Disco 240 Dmx Controller Manual

You might be adjusting Fader 1 on Page A (Channel 1), while your fixture requires Channel 9 (Fader 1 on Page B) for master dimming. Why are my lights flickering or moving randomly?

The Disco 240 utilizes a fixed DMX addressing profile. Each of the 12 Scanner buttons corresponds to a predetermined starting address spaced exactly 16 channels apart. To ensure your lighting fixtures respond correctly to the controller, you must set their digital address panels or DIP switches to match these exact numbers: Scanner Button Starting DMX Address Scanner 2 Channel 17 Scanner 3 Channel 33 Scanner 4 Channel 49 Scanner 5 Channel 65 Scanner 6 Channel 81 Scanner 7 Channel 97 Scanner 8 Channel 113 Scanner 9 Channel 129 Scanner 10 Channel 145 Scanner 11 Channel 161 Scanner 12 Channel 177

Use the Bank Up/Down buttons to select one of the 30 available banks. disco 240 dmx controller manual

: Trigger or save individual lighting looks.

Note: Some fixtures use 5-pin XLR – adapters are available. You might be adjusting Fader 1 on Page

Before diving into the manual, let's take a look at the specifications of the Disco 240 DMX controller:

If you have programmed your lights into a specific "look," you can recall it instantly. While in (EDIT/RUN LED off), press the RUN SCENE button followed by a P1 – P12 button. This recalls a pre-programmed snapshot. Each of the 12 Scanner buttons corresponds to

Double-check that your fixture's DMX address matches the controller's bank (001, 021, 041, etc.).

| Fader | Channel | Typical Function | |-------|---------|------------------| | 1 | 1 | Pan | | 2 | 2 | Pan Fine | | 3 | 3 | Tilt | | 4 | 4 | Tilt Fine | | 5 | 5 | Speed (Pan/Tilt) | | 6 | 6 | Dimmer | | 7 | 7 | Shutter/Strobe | | 8 | 8 | Color Wheel | | 9 | 9 | Gobo Wheel | | 10 | 10 | Gobo Rotation | | 11 | 11 | Prism | | 12 | 12 | Focus | | 13 | 13 | Zoom | | 14 | 14 | Frost/Effect | | 15 | 15 | Program Speed | | 16 | 16 | Reset/Control |