: Used to access the parameter menu, view alarm logs, and save configuration changes.
NTC thermistor probes (Appliance and Condenser)
is a smart controller that manages refrigeration units, lights, and energy-saving modes. By using motion detectors and door switches, the controller learns the habits of the store, switching to energy-saving modes during idle hours and restoring optimum cooling during high-traffic periods. elstat ems 55 advanced user manual new
Press Up and Down simultaneously to scroll through data like door openings (over 24h and 7 days) and compressor run-time. Factory Reset: Unplug the cooler. Hold Set and Defrost together.
Check connections for appliance (1) or condenser (2) sensors. Defrosting Normal cycle; wait for it to complete. : Used to access the parameter menu, view
Time the unit remains in saving mode after motion is detected. Defrost Termination Temp 2.0°C to 30.0°C Temperature at the evaporator sensor that ends defrosting. DFI Defrost Interval 1 to 24 hours Time elapsed between automatic defrost cycles. DTO Defrost Time Out 5 to 90 mins Maximum duration allowed for a defrost cycle. Sensor Placement and Calibration
To ensure maximum lifetime efficiency from your controller infrastructure, implement the following protocols: Press Up and Down simultaneously to scroll through
The integrated field test routine allows technicians to quickly verify components without using a multimeter. Step 1: Initialize Test Mode
Elstat EMS 55 Advanced User Manual: Complete Operations, Programming, and Troubleshooting Guide