Fnirsi 1014d Firmware Link Jun 2026

Copy the firmware file (usually named FSI-1014.bin ) to the root of this drive. It is recommended to clear existing files from the drive first.

If the 1014D does not show up as a drive, try a different USB port (preferably a USB 2.0 port on the back of the motherboard if using a desktop). If the problem persists, check your device manager to ensure standard USB mass storage drivers are loading correctly. The Screen is Black After Updating

: Community members on the EEVblog forum actively track firmware versions and provide unofficial backups for recovery. Update Procedure Overview fnirsi 1014d firmware link

If you have trouble navigating the official site, many users mirror the files. Below is a commonly used source link structure found in the community:

For the best experience, it is highly recommended to follow the official update path provided by FNIRSI. Copy the firmware file (usually named FSI-1014

A: You may have installed the wrong firmware (1013D instead of 1014D). You will need to put the device into DFU mode and flash the correct firmware using a tool like "STM32 Cube Programmer," which is an advanced recovery method.

Download the appropriate .bin or update package from the official link above. Extract the downloaded zip file onto your computer. Phase 2: Connecting the Oscilloscope Power the FNIRSI 1014D. If the problem persists, check your device manager

Allows you to choose between different firmwares by holding a key during power-on.

Locate the existing FSI-1014.bin on that drive and delete it .

Take the downloaded firmware file (typically named 1014d.bin or similar) and drag-and-drop it directly into the of the oscilloscope's drive. Note: Do not place the file inside any sub-folders. Step 4: Finalize the Flash

Ensure you are using a data-transfer USB cable, not a power-only charging cable. Try switching to a USB 2.0 port instead of a USB 3.0 port on older computers.