Ensure you are using the latest version to handle modern UEFI standards.

: It supports cycling through multiple boot images randomly if configured in the config.txt file.

Before this version, users often experienced blind boot loops or errors when the tool tried to access the UEFI setup. The specifically highlight two critical fixes:

Before running the setup, open the config.txt file. The quality of your boot sequence relies on the parameters set here.

: Ensure the file is correctly named splash.bmp and placed in the appropriate root directory of the software folder before installing.

It must be a 24-bit BMP or 32-bit BMP image. Lower color profiles (like 8-bit) will result in color banding and failure to load. 2. Resolution and Aspect Ratio Matching

. While some modded versions support PNG/JPEG, the standard release requires BMP. Resolution & Aspect Ratio

Businesses can replace the default manufacturer logo with their company logo for a personalized, corporate look on all workstations.

Use high bitrate encoding to avoid pixelation in dark or complex scenes.

"How to change your Windows boot logo in 3 steps: 1️⃣ Disable Secure Boot. 2️⃣ Grab HackBGRT. 3️⃣ Replace 'splash.bmp' with your own high-res design. It overrides the BGRT table in your UEFI firmware for a truly custom start. 🚀 #Windows11 #SoftwareHack #UEFI"

Reboot your computer and enter your motherboard's BIOS/UEFI settings (typically by tapping F2 , F12 , or Del during startup). Navigate to the or Boot tab. Locate Secure Boot and set it to Disabled . Save your changes and boot back into Windows. Step 2: Extract and Configure HackBGRT

HackBGRT is a boot logo changer specifically designed for UEFI systems. It works by exploiting a feature within the UEFI firmware called the Boot Graphics Resource Table (BGRT). When a computer boots, the UEFI firmware uses this table to display the manufacturer's logo (e.g., Dell, HP, Lenovo).