Harvey Hv3 Water Softener Installation — Manual

The HV3 has a marked and OUT on the valve head.

Then fill the softener with block salt—remember, the Harvey HV3 is designed specifically for block salt, and using granular or tablet salt can block the tray and cause problems with the brine valve. Do not fill the salt compartment higher than the bottom edge of the lift handles on the sides of the softener cabinet, as overfilling can prevent the float valve from operating correctly. harvey hv3 water softener installation manual

The ideal spot for your HV3 is close to the mains water inlet, before the water heater, and within reach of a suitable drain. For most UK homes, this means the kitchen cupboard under the sink. The HV3 was designed specifically to be compact enough to fit in this space. The HV3 has a marked and OUT on the valve head

Keep the inlet and outlet valves , and open the bypass valve to restore temporary hard water supply to the house while you connect the unit. 3. Connecting the Softener The ideal spot for your HV3 is close

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.

Once everything is securely connected, you are ready to pressurize and test the system. 1. Flush the Lines