Remove the new cartridges from their packaging and remove the plastic protective tape, being careful not to touch the copper-colored contacts or ink nozzles.
Since the 2300 series connects via , you will need a standard A-to-B USB cable (usually sold separately). Official HP Site: Go to hp.com on your computer.
Visit the official page. Enter HP DeskJet 2300 into the search bar. Select your computer's operating system. hp deskjet 2300 all in one printer setup
Open the cartridge access door. Take out both ink cartridges, verify the pink tape is 100% removed, and re-seat them firmly into their correct left/right positions.
Locate and remove every piece of blue packing tape from the exterior. Remove the new cartridges from their packaging and
Press the Power button to turn the printer on. Wait for the carriage to move to the center and become silent. Step 2: Loading Paper and Installing Ink Cartridges
Step two: Install the cartridges. He opened the front hatch. The printhead carriage was lodged to the right, silent and stubborn. Leo pressed the power button. The DeskJet 2300 whirred to life—a gentle, almost apologetic hum—and the carriage glided to the center. He clicked in the black and tri-color cartridges with two definitive snaps. Snap. Snap. So far, so good. Visit the official page
The printer scans the page and aligns the internal printhead. Troubleshooting Common Setup Issues Computer Does Not Recognize the USB Connection
Insert a stack of plain white U.S. letter or A4 paper into the tray and slide the guide until it rests against the edge of the paper.
Follow this guide to get your printer up and running.