Hp Fxn1 E93839 Motherboard Specs Updated

series desktops. It uses an Intel-based architecture designed for business-class performance and stability. Quick Facts Intel Q67 Express UDIMM (non-ECC) Form Factor: Proprietary ATX-based design Common Systems: HP Compaq 8200 Elite (CMT and SFF variants) Technical Specifications

Designed primarily for standard office multitasking, the board features a streamlined memory configuration optimized for stability.

: It uses an HP proprietary ATX-based design. Because the mounting holes and power connectors are non-standard, it is not compatible with standard aftermarket PC cases. hp fxn1 e93839 motherboard specs updated

If your board is inside an SFF (Small Form Factor) case, you must use low-profile (LP) graphics cards that do not require external PCIe power cables, such as the Nvidia GTX 1650 LP or RTX 3050 6GB LP.

The system board relies on a dual-chip corporate platform architectural design, marrying a standard Intel engineering environment with robust business manageability features. Updated Specification Foxconn (for HP OEM) Model / Regulatory Mark FXN1 / E93839 Compatible Systems HP Compaq 8200 Elite (SFF / CMT) Chipset Intel Q67 Express CPU Socket LGA 1155 (Socket H2) Memory Support 4x DDR3 DIMM slots (Up to 32GB) Form Factor Proprietary Modified ATX / SFF Processor Socket and CPU Compatibility series desktops

Intel Q-series (e.g., Q65, Q75, or Q87 depending on the generation)

Using an + 16GB DDR3-1600 + SATA III SSD : : It uses an HP proprietary ATX-based design

None. NVMe or M.2 SATA SSDs require a PCIe adapter card. Rear I/O Panel and Connectivity

Unlike standard retail motherboards that use a 24-pin ATX power connector, the HP FXN1 E93839 typically uses a configuration. Standard ATX power supplies will not plug into this board without a specific 24-pin to 6-pin adapter cable. 2. Front Panel Header