Navigate to the extracted IDT 2.0 folder, locate IDT.exe , right-click it, and select .
: You must know how to short the hardware testpoint on your specific phone model to force it into COM 1.0 mode.
: Standard .APP firmware will not work. You need the specific "Board Software" package for your model, which includes the necessary .xml map file. huawei flash tool idt 2.0
Use metallic tweezers to short the Test Point pin to the metal ground shield. While holding the short, plug the USB cable into the PC.
Use metal tweezers to bridge (short) the Test Point pin to a ground shield (any metal shielding on the board). While holding the short, plug the USB cable into the PC. Navigate to the extracted IDT 2
Navigate to your IDT folder and launch IDT.exe as an administrator.
In the IDT interface, click on the (Settings) or look for the Browse/Open option. Navigate to your extracted Board Software folder. You need the specific "Board Software" package for
: Compatible with a wide range of HiSilicon Kirin chipsets (e.g., Kirin 650, 710, 960, 970). Prerequisites and Requirements
Open on Windows. Under the "Ports (COM & LPT)" section, verify that the device is detected as Huawei USB COM 1.0 (COMxx) . Step 2: Configuring IDT 2.0
The Image Deployment Tool (IDT) version 2.0 is a proprietary XML-based flashing utility utilized by authorized Huawei repair centers. It communicates with the smartphone when it is in a low-level hardware interface mode, bypasses standard Android boot restrictions, and writes raw partition images directly to the device storage. Key Features
The loaded Board Software XML file does not match your device's exact processor architecture or model.