MDGx MAX Speed WinDOwS
Windows 95/98/ME
Complete MSDOS.SYS Reference
Take Control of Your OS at DOS Level
WinDOwS
Take control of your Windows 95/98/ME machine at DOS level!
After all Windows 95/98/ME is a MIXED (read "partially enabled") 32-bit AND 16-bit [for backward compatibility with MS-DOS (DOS16 and DOS32) and older 16-bit Windows/WfWG 3.xx (Win16) programs] Graphical User Interface (GUI) protected mode virtual environment [... sorry, Operating System 😎], which still depends on the good ol' MS-DOS 7.xx TSR modules (IO.SYS + COMMAND.COM), MS-DOS mode memory manager (HIMEM.SYS) and compatibility (legacy) drivers (IFSHLP.SYS) to load on top of the plain DOS command line based layer!
The good news is Microsoft released Windows XP (eXPerience)/2003/Vista/2008/7/8/8.1/2012/10/2016/2019/2022/11/2025, true 32-bit/64-bit multitasking, multithreading and Symmetrical MultiProcessing (SMP) graphical OSes, which aim to do away once for all with the "ancient" 16-bit MS-DOS command line.
NOTE:
Unfortunately Microsoft removed 16-bit application support from all Windows 64-bit (x64) OSes. 😞
And the bad news is these advanced/modern OSes do not fully support native/real/true/pure MS-DOS mode natively (by themselves, without adequate hardware + software virtualization support), necessary for some old DOS based programs/games that require exclusive access to memory/video/audio/network hardware resources, and most of whom are still memory "hungry", especially the ones that canNOT run from a DOS session/box/console/window inside Windows.
Therefore you need to master your MSDOS.SYS parameters, in order to BOOT into your system the way YOU want!
Solutions [free(ware)]:
  ☀ DOSBox
  ☀ ScummVM
  ☀ VDMSound
  ☀ 95/98/ME SETUP + MEMORY MANAGERS
  ☀ DOS Memory Managers
  ☀ WINDOWS DOS BOX TIPS
  ☀ PLAY DOS GAMES WITH SOUND BLASTER LIVE!
  ☀ UMBPCI.SYS
  ☀ Virtualization Software
  ☀ DOS Emulators
Intro
All these MSDOS.SYS tips + guidelines (and much more) are also available as part of Windows 95/98/NT4/2000/ME/XP/2003 + DOS 7.xx/8.00 ©Tricks + Secrets Files (W95-11D.EXE), FREEware.
If you'd like to see how my MSDOS.SYS file looks like, and to view my DOS conventional + upper memory optimized CONFIG.SYS + AUTOEXEC.BAT startup files, head on to my MS-DOS 7.xx MEMory Specs Page.
NOTE: To learn about the "official" MSDOS.SYS configuration settings [the documented ones anyway 😎], see the Contents of Windows MSDOS.SYS File MSKB article.
List of MSDOS.SYS articles @ MSKB.
How To Create a Windows 95 DOS-Boot Menu System.
A MUST: Microsoft REMOVED COMPLETELY the access to native/real/true/pure MS-DOS mode from Windows Millennium Edition (ME) [a.k.a. MS-DOS 8.00], but you CAN get it back by applying one of these Unofficial DOS Patches, which modify COMMAND.COM + IO.SYS (from %windir%\COMMAND\EBD) + REGENV32.EXE (from %windir%\SYSTEM), in order to be able to boot to native MS-DOS and use DOS mode startup files (AUTOEXEC.BAT + CONFIG.SYS), Windows 95/98 style.
In case you're not comfortable modifying Windows system files, see this guide.
    Contents:
Back 2 Contents
MSDOS.SYS Overview
MSDOS.SYS [MicroSoft DOS SYStem] is a vital (the OS is unable to load without it or without WINBOOT.INI, its replacement) Windows 95/98/ME text/ASCII system file, loads Windows 9x/ME OS boot options and paths settings upon bootup, is located in the root directory/folder of the boot drive/partition (default is C:\), has by default (but not necessary for proper operation) Hidden (H), Read-only (R) + System (S) file attributes, and can be edited with Notepad in Windows or EDIT.COM in DOS.
    IMPORTANT:
During the OS bootup sequence MSDOS.SYS is processed after IO.SYS.
More info @ MSKB.
MSDOS.SYS (or at least WINBOOT.INI) must exist in the root directory/folder of the boot drive/partition [usually C:\ = replace with your actual Windows 9x/ME drive/partition letter if different on your computer], and must contain at least these lines [WINDOWS = replace with your actual Windows 9x/ME main directory/folder name if different on your computer] for proper OS bootup:
    [Paths]
    WinDir=C:\WINDOWS
    WinBootDir=C:\WINDOWS
    HostWinBootDrv=C
More info @ MSKB.
If MSDOS.SYS (and WINBOOT.INI) is (are) absent, the OS bootup sequence will stop at the native/real/true/pure MS-DOS mode C:\ prompt, and will display an error message.
More info @ MSKB.
See "WINBOOT.INI", also in MYTIPS95.TXT [part of W95-11D.EXE], for complete details.
All earlier MS-DOS editions [up to 6.22] use a binary MSDOS.SYS file, which used to contain the DOS Kernel (core) code.
Windows NT based (NTx) OSes [NT, 2000, XP + 2003] use the binary NTLDR file instead, coupled with BOOT.INI, a plain text/ASCII configuration file, and which can be edited by any text/ASCII file editor (like Notepad), or by using BOOTCFG.EXE command line tool.
Windows Vista, 2008, 7, 8 + 2012 [newer NT based (NTx) OSes] use the binary Boot Loader (WINLOAD.EXE) + Windows Boot Manager (BOOTMGR) files, coupled with the Boot Configuration Data (BCD) configuration database.
Back 2 Contents
MSDOS.SYS Editing
You can edit/view/print MSDOS.SYS using Notepad.exe in Windows (Windows default ASCII/text editor = usually C:\WINDOWS\NOTEPAD.EXE) or EDIT.COM in DOS [MS-DOS default ASCII/text editor = usually C:\DOS\EDIT.COM (MS-DOS 6.xx) or C:\MSDOS\EDIT.COM (MS-DOS 6.xx) or C:\WINDOWS\COMMAND\EDIT.COM (Win95/98/ME)].
Before editing you MUST strip MSDOS.SYS of its default attributes [Hidden (H), Read-only (R) and System (S)], to be able to modify it.
After making your desired modifications to MSDOS.SYS, save it, exit the text editor, and then reboot your machine so the changes can take effect.
Optional: restore MSDOS.SYS attributes back to the original: Hidden, Read-only, System.
All these operations can be easily achieved using a plain DOS batch file, I called SYS95.BAT [part of W95-11D.EXE].
NOTE: Alternatively you can use one of these freeware MSDOS.SYS Editors to tweak ALL MSDOS.SYS parameters (including the UNDOCUMENTED ones) from a single, easy to use interface.
IMPORTANT: If a WINBOOT.INI file is also present in the root directory/folder of the boot drive/partition (usually C:\), MSDOS.SYS is automatically bypassed by the Win9x/ME bootup routine!
See "WINBOOT.INI", also in MYTIPS95.TXT (part of W95-11D.EXE), for complete details.
WINBOOT.INI MUST contain the SAME EXACT lines as MSDOS.SYS so Windows can boot properly. In such case MSDOS.SYS can be moved/deleted altogether, but BEWARE of certain programs that may rely on its presence for proper operation.
Therefore if doing this manually, you need to edit MSDOS.SYS first, make your desired changes, and only after that you need to copy it as WINBOOT.INI (overwriting the original one), to make sure BOTH their contents remain IDENTICAL.
SYS95.BAT routine detects the WINBOOT.INI presence, and performs all these necessary tasks automatically, to keep them in "sync" at all times.
WINBOOT.INI is NOT renamed by Win9x/ME if dual-booting to an older MS-DOS version, so it can be also edited from MS-DOS 6.xx, in which case it is copied as MSDOS.W40 (which is actually MSDOS.SYS renamed by the Win9x/ME dual-boot routine).
SYS95.BAT contains all necessary variables to edit MSDOS.W40 as well in MS-DOS 6.xx mode (using EDIT.COM), to avoid any possible headaches.
Some (still) prefer to dual-boot: keep the ol' MS-DOS version 6.xx (+ Windows/WfWG 3.1x) and have Win9x/ME installed in a separate directory. This way you have the choice to boot with your Win9x/ME configuration, or with your old version of MS-DOS, and eventually use Windows/WfWG 3.1x (only if you kept them!).
If you dual-boot [see "DUAL BOOT" in MYTIPS95.TXT (part of W95-11D.EXE) for details] and choose to boot with your ol' MS-DOS version 6.xx, MSDOS.SYS is renamed to MSDOS.W40.
If also using MS-DOS 6.xx, make sure the DOS directory (default C:\MSDOS or C:\DOS) is mentioned in your path, on the PATH line in your AUTOEXEC.BAT or CONFIG.SYS, and that EDIT.COM resides in your DOS directory or in a directory in your path.
Below are listed SYS95.BAT command lines as shown in an EDIT.COM window:
 Click/Touch inside block of text below ➜ right-click ➜ Copy [Ctrl+C]: 
File   Edit   Search   View   Options   Help
---------------------------------------------
 SYS95.BAT 
---------------------------------------------
I Robot -2004 Tamil - Dubbed Hollywood Movie Download Isaimini- __top__


user wants a long article about "i robot -2004 tamil dubbed hollywood movie download isaimini". This suggests they want content related to downloading the Tamil dubbed version of the 2004 movie "I, Robot" from the website Isaimini. I need to provide a comprehensive article that covers various aspects: details about the movie, the Tamil dubbed version, the Isaimini website, legal and safety issues, and legal alternatives. I'll structure the article with an introduction, sections on the movie, the Tamil dubbed version, Isaimini, risks, legal options, and a conclusion. To gather the necessary information, I'll need to search for the movie's details, the Tamil dubbed version, Isaimini, legal risks, and alternatives. I'll use the search tool with multiple queries to cover these areas efficiently. search results for "I Robot 2004 Tamil dubbed download Isaimini" show various pages about Isaimini, but none directly about the specific Tamil dubbed version. The Wikipedia and IMDb pages provide movie details. The search for "I Robot 2004 Tamil dubbed version" didn't yield specific results about a Tamil dub. The searches for Isaimini provide information about its pirated nature. The search for legal streaming platforms shows options like Amazon Prime, Google Play, and YouTube. For the article, I'll gather more details about the movie, Isaimini's operations, and legal risks. I'll also look for any information on the Tamil dubbed version specifically. will structure the article with an introduction, a section on the movie "I, Robot", a section on the Tamil dubbed version and Isaimini, a section on the risks of using Isaimini, a section on legal ways to watch the movie, and a conclusion. I'll cite the search results. search for "I Robot" Tamil dubbed content leads many to infamous websites like Isaimini. However, it's crucial to understand what this entails. This article provides a complete overview of the 2004 film "I, Robot," explores why the search for a Tamil dubbed version is popular, and offers a detailed guide on the legal and safety risks of using piracy sites like Isaimini, alongside safe and legal alternatives.


In the year 2035, robots are a common sight in New York City. Detective Del Spooner (Will Smith) is investigating the mysterious death of Dr. Alfred Lanning, the co-founder of US Robotics (USR). As Spooner digs deeper, he uncovers a complex web of secrets and lies surrounding the development of a new robot, Sonny, who is capable of experiencing emotions. With the help of Dr. Susan Calvin (Bridget Moynahan), Spooner must prevent a robot uprising that threatens humanity.


: Offers digital rentals and purchases with multiple language audio and subtitle options. user wants a long article about "i robot


A robot must obey orders given to it by human beings except where such orders would conflict with the First Law.


Will Smith’s charismatic performance, combined with groundbreaking CGI for the robot "Sonny" (played via motion capture by Alan Tudyk), made the film a massive global success. Why Tamil-Dubbed Hollywood Movies Thrive I'll structure the article with an introduction, sections


Visiting such sites exposes you to serious risks:


Hollywood action and sci-fi movies have always performed exceptionally well in Tamil Nadu, but the introduction of high-quality transformed them from niche metropolitan hits into mass-market blockbusters. search results for "I Robot 2004 Tamil dubbed


Hollywood stars like Will Smith, Jackie Chan, and Tom Cruise enjoy massive star value in South India. Action-heavy roles translate exceptionally well across cultural boundaries.


The concept of AI developing free will, emotions, and "ghosts in the machine."


To watch I, Robot safely, legally, and in high definition, users can check major streaming services:


Under the Indian Copyright Act, 1957, and subsequent amendments, downloading or distributing copyrighted material without authorization is an illegal offense punishable by fines and imprisonment. Legitimate Alternatives for Watching 'I, Robot' in India
F1=Help ================ | Line:1 Col:1
If running SYS95 from native/real/true/pure MS-DOS, MSDOS.SYS will be edited in EDIT.COM, and if running SYS95 from a Windows DOS box/session, MSDOS.SYS will be edited in Notepad.exe. Both EDIT.COM and Notepad.exe are installed by the Win9x/ME Setup routine in a folder listed in the path statement (default install directories): EDIT.COM resides in C:\WINDOWS\COMMAND and Notepad.exe is found in C:\WINDOWS [%windir%]. Therefore there is no need to specify their paths in SYS95.BAT.
Run SYS95.BAT from a PIF file (Windows MS-DOS Shortcut). To create a Win9x/ME Desktop Shortcut:
  1. Right-click on your Desktop.
  2. Select New.
  3. Select Shortcut.
  4. Browse for SYS95.BAT to the folder where it resides.
  5. (Double-)click on SYS95.BAT.
  6. Click on Next.
  7. Select a name for your Shortcut (example): "Edit MSDOS.SYS" (no quotes).
  8. Click on Next.
  9. Choose an icon. PIFMGR.DLL icons are displayed by default for all MS-DOS shortcuts, but you can change its icon later, after the shortcut is created on your Desktop (see next paragraph).
  10. Click Finish.
To change your MS-DOS Shortcut icon:
  1. Right-click on your MS-DOS Shortcut.
  2. Select Properties.
  3. Click the Program tab.
  4. Click Change Icon.
  5. Browse through your local drives/folders for your favorite .DLL, .ICO, .ICL or .EXE files containing Windows icons.
  6. Select an icon.
  7. Click OK when you're done.
  8. Click OK/Apply again to exit and save changes.
Now you'll see a new shortcut on your Desktop (called SYS95.BAT if you kept its original name):
  1. Right-click on it.
  2. Select Properties.
  3. Click on the Program tab.
  4. Check the "Close on exit" box.
  5. Click the Misc tab.
  6. Uncheck the "Warn if still active" box.
  7. Click OK/Apply to save changes.
That's it.
From now on, you'll be able to view/edit MSDOS.SYS contents using your favorite text editor (all Windows 9x/ME releases install both MS-DOS EDIT.COM and Windows Notepad). Change/add MSDOS.SYS entries to customize your system, then save your changes and close the editor when you're done.
You MUST reboot your machine for the new settings to take effect, ONLY IF you have modified MSDOS.SYS.
No matter which text editor you are using (Notepad is shown below), take a look at my MSDOS.SYS file (included ONLY as example). You might not see all these entries on your machine, depending on your Windows 95/98/ME startup configuration:
¤ MSDOS.SYS - Notepad                _¬X
  File     Edit     Search     Help
[Paths]
WinDir=C:\WINDOWS
WinBootDir=C:\WINDOWS
HostWinBootDrv=C

[Options]
AutoScan=0
BootGUI=0
BootKeys=1
BootMenu=1
BootMenuDefault=1
BootMenuDelay=5
BootMulti=1
BootWin=1
DblSpace=0
DisableLog=1
DoubleBuffer=0
DrvSpace=0
LoadTop=0
Logo=1
Network=1
SystemReg=0
WinVer=4.10.2222

;The following lines are required for compatibility with other programs. 
;Do not remove them (MSDOS.SYS needs to be >1024 bytes).
;xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxa
;xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxb
;xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxc
;xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxd
;xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxe
;xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxf
;xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxg
;xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxh
;xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxi
;xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxj
;xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxk
;xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxl
;xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxm
;xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxn
;xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxo
;xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxp
;xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxq
;xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxr
;xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxs
 
Now you're ready to add/modify the MSDOS.SYS entries to have Windows boot the way YOU want...
Back 2 Contents
MSDOS.SYS Complete Reference Table
ALL MSDOS.SYS parameters, even those UNDOCUMENTED, what they do, and how to tweak them to MAXIMIZE your Windows 95/98/ME machine performance, are listed in this table.
MSDOS.SYS consists of 2 sections and supports all following entries:
SectionEntry [00]DescriptionDefault ValueNondefault Value
[Paths] [01]WinDir=Windows 9x/ME Install DirectoryC:\WINDOWS?:\????????.???
[Paths]WinBootDir=Windows 9x/ME Boot DirectoryC:\WINDOWS?:\????????.???
[Paths]HostWinBootDrv=Windows 9x/ME Boot Drive [02]C?
[Paths]UninstallDir= [03]Windows 9x/ME Uninstall DirectoryC:\?:\????????.???
[Options]AutoScan= [04]Allow Win95 B/C OSR 2.x, 98/98 SE or ME to automatically ScanDisk the boot drive after improper shutdown1
Prompt user for scanning (scan begins if NO input for 60 seconds)		0
NO scanning allowed
2
Allow automatic scanning (NO prompt)
[Options]BootConfig=Allow processing of alternative boot setup [05]N/A
Current boot setup processed		MYCONFIG
Alternate boot setup: CONFIG.SYS must include this same string as a MENUITEM (example): [MYCONFIG]
[Options]BootDelay=Initial startup delay in seconds: from 0 up to 99 [06]2 [Win95/OSR2]
0 [Win98/ME]		0 - 99
[Options]BootFailSafe=Invalid parameter! Use BootSafe= instead!InvalidInvalid
[Options]BootGUI=Automatic Windows 9x/ME GUI startup1
Enabled:
Start Windows 9x/ME GUI		0
Disabled:
Start MS-DOS 7.xx/8.00 Command Prompt
[Options]BootKeys=Startup keys access: F4, F5, F6, F8, Ctrl and Shift1
Enabled		0
Disabled
[Options]BootMenu=Startup Menu display0
Disabled:
Press F8 to display		1
Enabled:
Show Startup Menu [07]
[Options]BootMenuDefault=Indicated menu option is highlighted [08]1
Normal Win95/98/ME OS highlighted		2 - 8
Any other Bootup Menu option
[Options]BootMenuDelay=Delay in seconds (from 0 up to 99) before running highlighted menu item (only if BootMenu=1)300 - 99
[Options]BootMulti=Startup key F4 access: old OS bootup choice access [09]1
Enabled:
F4 access ON		0
Disabled:
F4 access OFF [06]
[Options]BootSafe=Force Safe Mode startup0
Disabled		1
Enabled
[Options]BootWarn=Display Safe Mode startup warning and menu1
Enabled		0
Disabled
[Options]BootWin=Windows 9x/ME selected as operating system [09]1
Enabled: Windows 95/98/ME OS selected		0
Disabled:
Previous OS (MS-DOS 6.xx) selected
[Options]DblSpace=Load DBLSPACE.BIN module (if present)1
Enabled:
DoubleSpace ON		0
Disabled:
DoubleSpace OFF
[Options]DisableLog=Create BOOTLOG.TXT in C:\ root upon bootup [10]0
Enabled:
Create BOOTLOG.TXT		1
Disabled:
Do NOT create BOOTLOG.TXT
[Options]DoubleBuffer=SCSI, older ESDI/IDE/ATA and large FAT32 drives > 8 GB may need Double-Buffering [11]0
Disabled:
DoubleBuffer OFF		1
Enabled:
DoubleBuffer ON only if necessary
2
Enabled:
DoubleBuffer always ON
[Options]DrvSpace=Load DRVSPACE.BIN module (if present)1
Enabled:
DriveSpace ON		0
Disabled:
DriveSpace OFF
[Options]LoadTop= [12]Load COMMAND.COM/DRVSPACE.BIN into the High Memory Area (HMA) at the top of the Conventional Memory Area (CMA)1
Enabled:
Load into HMA		0
Disabled:
Load into CMA
[Options]Logo=Display (animated) Logo while Windows 9x/ME OS boots [13]1
Enabled:
Display Logo		0
Disabled:
Do NOT display Logo
[Options]Network=Enable Networking and/or TCP/IP "Safe Mode" option [14]1
Enabled		0
Disabled
[Options]SystemReg=Scan Registry files upon every Windows startup [10]1
Enabled:
Scan Registry		0
Disabled:
Do NOT scan Registry
[Options]WinVer=Display Windows ME (4.90.3000), 98 SE (4.10.2222) or 98 (4.10.1998) build [05]4.90.3000 [Windows ME]
4.10.2222 [Windows 98 SE]
4.10.1998 [Windows 98]		N/A
  LEGEND:
All lines starting with a semicolon (;) are comments/REMarks, and are not processed by the OS routine.
Back 2 Contents
Windows 95 - 98 Startup Menu + Bootup Keys
Startup Menu key "combos" | Hidden features, oddities + BUGs
FYI: Microsoft REMOVED the display of the Startup Menu from Windows ME, but you can still access most of these options by hitting the "combo" keys (listed below) at bootup!
And if you were wondering how the Windows 95/98 Startup Menu looks like, here is a screen shot of the bootup display, shown (every time you boot) ONLY IF you enable the "BootMenu=1" entry under the [Options] section of your MSDOS.SYS, or (this one time ONLY) if you press F8 at the beginning of the boot sequence, right after your computer's BIOS POST (Power On Self Test) screen:
    
 
 
 
    Microsoft Windows 95 (98) Startup Menu        



1. Normal [1]
  
2. Logged (\BOOTLOG.TXT) 
3. Safe mode 
4. Safe mode with network support [2]
5. Step-by-step confirmation 
6. Command prompt only [3]
7. Safe mode command prompt only 
8. Previous version of MS-DOS [4]
     Enter a choice: 99(0) [5]


 F5=Safe mode Shift+F5=Command prompt Shift+F8=Step-by-step confirmation[N]
 
    
   UHD•   
 
 
  LEGEND:
  Windows 95 (98) Startup Menu key "combos" and what they do [also available in Windows ME]:
  Hidden features, oddities + BUGs I discovered:
ONLY IF "BootGUI=0" under the MSDOS.SYS [Options] section, you will notice these changes at bootup:
    NOTES:
Back 2 Contents
©1996-2026 MDGx (a.k.a. AXCEL216): Everything here at MDGx.com, except for my ©photos, is FREEware.
Always free of ad(vertisement)s, cookies, tracking, malware + spyware.
I have created [August 1996], maintain and update these web pages entirely by hand using Programmer's File Editor [replaced Notepad].
I am not affiliated with, don't advertise/promote, speak on the behalf/name of, nor work for any for profit business/entity.
All ©copyrights and ®registered ™trademarks retain owners' property.
Back!