Opening the back panel may void your warranty.
Use a heat gun or hair dryer to gently warm the edges of the back cover to soften the adhesive.
To access the EDL points, you must partially disassemble the phone: Use a SIM ejector tool. iqoo z6 pro edl point better
EDL mode allows for flashing stock firmware even if the bootloader is locked or corrupted.
Locate the (test points) positioned near the battery connector or the main chipset housing. Opening the back panel may void your warranty
Look closely near the chipset shielding or the battery connector terminal. You will see two tiny, bare golden dots placed right next to each other.
The primary application of the EDL point is to force-flash stock firmware onto the device. This is essential for recovering from severe software corruption, such as a failed system update, a malicious virus, or accidental deletion of critical system files. The process involves using tools like to write the correct firmware files onto the device. This function is particularly effective for the iQOO Z6 Pro, as it can resolve persistent boot loop errors and restore the device to a fully functional state. EDL mode allows for flashing stock firmware even
To access the test points, you must carefully remove the phone's back panel. Remove the Back Cover:
: Remove the 18 Phillips screws holding the internal housing. Lift the back housing to expose the motherboard. Shorting the Points Disconnect the battery cable for safety.
Once shorted correctly, the PC chimes—recognizing the device as "Qualcomm HS-USB QDLoader 9008." The "dead" phone is now ready to be brought back to life with a fresh installation of Funtouch OS.
The iQOO Z6 Pro's EDL point is considered a better solution for several reasons: