Konica Minolta Bizhub C258 Factory Reset

Save existing user codes, department IDs, and tracking data if applicable.

Restart the machine using the main power switch located inside the front cover.

Disclaimer: This guide is for informational purposes. Service Mode modifications may void warranties if performed incorrectly. Proceed at your own risk.

Log into the web interface using a computer on the same network to import your saved address book and SMB scanning paths. konica minolta bizhub c258 factory reset

Enter using the keypad sequence outlined above. Navigate to State Confirmation →right arrow Memory/HDD Adjustment . Select Format HDD .

Select to reset all settings and erase user information. Press the Start button on the keypad.

Once the "Trouble Reset" screen appears, tap the button on the screen and restart the machine. Save existing user codes, department IDs, and tracking

Konica Minolta bizhub C258 Go to product viewer dialog for this item.

To entirely wipe the system memory and restore the Bizhub C258 to its factory-default operating state, you must enter the technician's . How to Access Service Mode on a Bizhub C258: Press the Utility key on the control panel. Tap Counter (or Device Information / Check Counter ).

A: No. A factory reset (even "Overwrite All Data") does not change the firmware version. Firmware is separate software stored in a different part of the machine's memory and can only be upgraded or downgraded through a dedicated firmware update procedure. Service Mode modifications may void warranties if performed

Document the printer’s current IP address, subnet mask, gateway, and DNS settings.

: Once the screen displays "OK," turn the main power switch off and then back on.

: Performing a full initialization will delete your address books and scan-to-email settings. Always export your Address Book