Rc415tam Motherboard Manual Jun 2026

Connect the Hard Drive Activity LED cable. Pin 1 is positive (+), Pin 3 is negative (-).

1 × PCI Express x16 (runs at x16 or x8 speed depending on specific OEM firmware) 1 × PCI Express x1 2 × Legacy PCI slots 4 × SATA I (1.5 Gb/s) ports

The is an OEM motherboard produced by ECS (Elitegroup Computer Systems) , specifically for Gateway and Acer desktop systems (such as the Gateway GT5404 and GT5058).

Connect the Power Button cable. Polarity does not matter. rc415tam motherboard manual

: Legacy drivers for the ATI chipset and Realtek audio are typically required for Windows XP or Windows 7 installations. ECS RC415T-AM - The Retro Web

2 x DDR2 SDRAM DIMM slots (Support up to 2GB, sometimes 4GB, DDR2 533/667)

Power Switch (Orientation does not matter). Pin 9: Reserved/No connection. Pin 10: Key (Missing pin for alignment). Front Panel Audio Header (F_AUDIO) Connect the Hard Drive Activity LED cable

: The board maxes out strictly at 2 GB of total RAM. If you install a single 4 GB DDR2 stick or high-density modules, it will fail to initialize. Swap it out for low-density 1 GB DDR2 sticks.

Without the , tasks like connecting the front panel power switch, configuring jumpers for CMOS reset, or identifying the correct RAM slot population become guesswork. One wrong connection can short the board.

Release the socket load lever on the LGA775 socket and open the metal load plate. Connect the Power Button cable

The board features two DDR2 DIMM slots, typically supporting DDR2 533/667 MHz SDRAM.

Requires a standard 24-pin ATX main power connector and a 4-pin 12V P4 auxiliary connector for the CPU.