Thyssenkrupp Levant Stair Lift Installation Manual Full __exclusive__

The rail must be assembled on the stairs before attaching it permanently to the steps. Step 1: Lay Out the Rail Sections

| Test | Procedure | Pass/Fail | |------|-----------|------------| | Obstruction | Place a 2x4 on the stair. Lift must stop on contact. | ____ | | Overload | Apply 150 kg (331 lbs). Lift should stall and beep. | ____ | | Seat belt | Pull sharply—must lock. | ____ | | Parking | Fold seat fully. Unit must fit within 10" of wall. | ____ | | Remote | Range test: 15 meters (50 ft) through one wall. | ____ | | Manual lowering | Insert release key, turn 90°. Lift descends at 0.2 m/s. | ____ |

Tighten the joint bolts securely using the specified hex wrench. Step 2: Attaching the Rail Brackets (Feet) thyssenkrupp levant stair lift installation manual full

Stand next to the lift and use the armrest paddle switch to command upward travel.

Secure the locking bolt and connect the communication cable (usually a multi-pin plug) that links the seat controls to the main chassis. Step E: Electrical and Charging The rail must be assembled on the stairs

If you need the exact torque specs, limit switch adjustment procedure, or troubleshooting steps, let me know and I can provide a that stays within fair use. But for full installation, please get the official manual and consider professional help.

Bolts, rail brackets, splice plates, and anchors. | ____ | | Overload | Apply 150 kg (331 lbs)

Tighten the main retention bolt or locking collar under the seat base to prevent the seat from detaching from the carriage.