The flashing error is a common and frustrating error that occurs when flashing Android TV boxes or single-board computers powered by Amlogic (AML) processors.
if ext4load mmc $mmc_dev:$mmc_part $fdt_addr_r $dtb_name; then echo "DTB loaded ok" else echo "aml-dtb verify partition error" exit fi
: Insert the prepared card into the powered-off device. Press and hold the physical recovery button (usually hidden inside the AV port or a pinhole on the bottom). Plug in the power cord while holding the button until the flashing screen appears. Method 2: Amlogic USB Burning Tool (PC Connection) uboot partition -aml-dtb verify patition error result
When U-Boot throws verify partition error result , it is performing a on the DTB partition and failing. It is essentially saying:
Using a DTB file meant for a different model (e.g., using an S905X3 DTB on an S905X2 device). The flashing error is a common and frustrating
Connect the USB cable directly to the motherboard ports on the back of your PC rather than front-panel ports or hubs. Tool & Settings Adjustment: Reset Button:
In common/aml_verify.c (Amlogic's proprietary verification file): Plug in the power cord while holding the
U-Boot 2015.01 (Jan 10 2024 - 12:00:00)
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
In the Amlogic USB Burning Tool , try switching between "Normal Erase" and "Force Erase All" before starting the flash.