V2ray Mikrotik Better Jun 2026

Set the container directory:

: Your router must have an ARM, ARM64, or x86 CPU. MIPSBE devices generally do not support containers.

Add a route pointing all traffic in that table to the container IP:

Example Minimal Flow (policy-routing approach) v2ray mikrotik

This guide explains why you should use V2Ray on MikroTik, the prerequisites, and a step-by-step approach to setting it up using modern Docker container features. Why Use V2Ray on MikroTik?

Common Deployment Patterns

Using V2Ray on MikroTik devices is a powerful way to bypass network restrictions like DPI (Deep Packet Inspection), which often blocks standard VPNs like OpenVPN or WireGuard . Since MikroTik's RouterOS does not support V2Ray natively, the primary method for implementation is using , a feature introduced in RouterOS 7.5 . 1. Implementation Strategy: RouterOS Containers Set the container directory: : Your router must

/ip route add gateway=192.168.88.10 routing-mark=v2ray-mark

Create and start the container, mapping the uploaded configuration directory to the container's expected config path:

] }

Older guides may discuss a native V2Ray package for RouterOS. This method is considered outdated, lacks support for modern V2Ray features, and is not recommended over the robust container approach. The official V2Ray project no longer offers packages for RouterOS, making this method obsolete.

Make sure V2Ray accepts inbound socks/http connections from local network addresses. Step 2: Configure Mangle Rules on MikroTik

MikroTik RouterOS does natively support V2Ray protocols (VMess, VLESS, Trojan, etc.). However, you can run V2Ray on a MikroTik device if it supports containers (ARM64, x86_64, or CHR with container package). For older devices, you need an external client (Raspberry Pi, PC, or a second router) and route traffic through it. Why Use V2Ray on MikroTik