This indicates either a wrong firmware (using SC7731 on SC9832 hardware) or a hardware short circuit. Revert to original firmware immediately.
If you want, I can:
Vivo Y1s Flash File (Firmware) Download: Fix Dead, Hang on Logo, and Bootloop vivo y1s 2015 flash file dead hang logo 100 te hot
For users dealing with a Vivo Y1s (model 2015/PD2014F) that is "dead," stuck on the "hang logo," or experiencing boot loops, a full firmware flash is often the 100% tested solution to revive the device. This process involves using specialized tools to overwrite the corrupted system software with a clean "flash file" or stock ROM. Core Recovery Requirements To fix a dead or hanging , you typically need the following verified components: Flash File (Stock ROM): Specifically for the (MT6765) model. Flash Tool: SP Flash Tool
"She’s gone, man," said Benny, the shop apprentice, chewing on a toothpick. "Customer said it dropped. Screen's fine, but it’s stuck on the logo. Been hanging on that 'Vivo' screen for an hour. It’s dead in the water." This indicates either a wrong firmware (using SC7731
"Not bad for a 2015 model," Raju said, handing the device to Benny. "Put a new battery in it before the customer comes back. And mark that file as . That was a close one."
In the section, click 'Choose' and navigate to your extracted Vivo Y1s firmware folder. Select the Android scatter text file (e.g., MT6765_Android_scatter.txt ). This process involves using specialized tools to overwrite
It didn't hang. It didn't freeze. It slid gracefully into the home screen, demanding a SIM card PIN.
Open the extracted folder and locate the text file named MT6765_Android_scatter.txt .
– Once detected, remove the short. Click Download in SP Flash Tool.
